8
ENGLISH
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 22.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...
Setting the clock
1
2
Set the hour, minute, and clock
system.
1 Select “CLOCK H” (hour), then
adjust the hour.
2 Select “CLOCK M” (minute),
then adjust the minute.
3 Select “24H/12H,” then select
“24H” (hour) or “12H” (hour).
3 Finish the procedure.
To check the current clock time when the
power is turned off
EN06-11_G612[EX_EU]1.indd 8EN06-11_G612[EX_EU]1.indd 8 10/26/04 8:57:28 PM10/26/04 8:57:28 PM
To Next Page
Loading...
Need help?
General
