16
ENGLISH
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2 Select a PSM item.
General settings — PSM
Indications Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [7].
DEMO OFF : Cancels.
CLOCK H
Hour adjustment
0 – 23 (1 – 12), [7]
[Initial: 0 (0:00)]
CLOCK M
Minute adjustment
00 – 59, [7]
[Initial: 00 (0:00)]
24H/12H
Time display mode
12H O 24H, [7]
[Initial: 24H]
CLK ADJ
Clock adjustment
AUTO : [Initial]; The built-in clock is automatically adjusted
using the CT (clock time) data in the RDS signal.
OFF : Cancels.
AF-REG
Alternative frequency/
regionalization
reception
When the received signals from the current FM RDS station become
weak...
AF : [Initial]; Switches to another station (the programme
may differ from the one currently received), [11].
• The AF indicator lights up.
AF REG : Switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
OFF : Cancels (not selectable when “DAB AF” is set to “AF ON”).
PTY-STBY
PTY standby
Activates PTY Standby Reception with one of the PTY codes, [10].
OFF [Initial] = PTY codes, [10] = (back to the beginning)
EN08-17_KD-G722_003A_3.indd 16EN08-17_KD-G722_003A_3.indd 16 11/23/05 9:10:45 AM11/23/05 9:10:45 AM
To Next Page
Loading...
Need help?
General
