JVC KD-HDR20 User Manual

Listening to the Satellite Radio
Before operating, connect either one of the following (not supplied) to the CD changer jack on the rear of this unit.
• JVC SIRIUS Satellite Radio System, SC -Cl and KS-SRA 100, PnP, SC -VDOC1 and KS-SRA 100, for listening to the
SIRIUS Satellite Radio .
• XM Satellite Radio System, JVC Smart Digital Adapter-XMDJVC100, CNP2000UC and CNPJVC1 for listening to
the XM Satellite Radio.
~(Global Control Information) update
• If channels are updated after subscription, updating starts automatically. "UPDATING" or "UPDATE XXX%" flashes
and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your Satellite Radio.
2
17
Activate your 51 RlU5 subscription after
connection
1 (fa
Q)/ATT
~~~~.=.:::::::::::
SIRIUS Satellite Radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite Radio tunes in to
the preset channel, CH184.
3 Check your SIRIUS ID (see page 24).
4 Contact SIRIUS on the internetat
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-S39-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
1
Q)/ATT
2 SRC" ~_=.:::::::::::::::j
XM Tuner* starts updating all the XM channels.
"Channell" is tuned in automatically.
3 Check your XM Satellite Radio ID labelled
on the casing of the XM Tuner, or tune in to
"Channel 0" (see page 18).
4 Contact XM Satellite Radio on the internet
at <http://xmradio.com/activation/>
to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
* XM Tuner: XMDirect 1M Tuner Box or XMDirect2 Tuner
System
EXTERNAL DEVICES

JVC KD-HDR20 Specifications

General

Brand	JVC
Model	KD-HDR20
Category	Car Receiver
Language	English