JVC KD-LX111 User Manual

17
ENGLISH
4 Select the items you want to adjust.
• See page 15 for details.
5 Adjust the level.
6 Repeat steps 4 and 5 to adjust the
other items.
• To adjust the BBE
II
level, see page 15.
7 Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 16.
SEL
S
• When “CEQ LINK” is set to “LINK ON”
The selected sound mode can be stored in
memory for the current source.
Each time you change to the same source, the
same sound mode is also recalled and shown
on the display. The CEQ indicator also flashes.
• When “CEQ LINK” is set to “LINK OFF”
The selected sound mode effect applies to any
source.
Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1 Press BAND MODE (M) to make the
number buttons work as different
function buttons.
2 Activate custom equalizer (CEQ).
The last selected sound mode is
recalled and applied to the
current sound.
3 Select the sound mode you want.
Each time you press the button,
the sound modes changes as
follows:
Ex.: When you adjust “TRE.”
To increase the level.
To decrease the level.
DIRECTORY
CEQ
MO
ST
RPT
RND
AF
REG
TP
PTY
BBE
Equalization pattern changes as you
adjust the bass or treble.
M
BAND
MODE
1
7
EQ
CEQ
MO
ST
RPT
RND
AF
REG
TP
PTY
BBE
Ex.: If you have selected “POPS” previously.
1
7
EQ
CLASSIC
POPSHIP HOPJAZZ
USER
ROCK
EN15-17.KD-LX333_111[J]f.pm5 12/6/01, 5:04 PM17

JVC KD-LX111 Specifications

General

Brand	JVC
Model	KD-LX111
Category	Car Receiver
Language	English