ENGLISH
11
OPERATIONS & EXTERNAL DEVICES
Listening to the other external components
You can connect an external component to AUX (auxiliary) input jack on the control panel.
Preparation: Make sure “AUX ON” is selected in the “SRC SELECT” = “AUX IN” setting, see page 15.
1
Select “AUX IN.”
2
—
Turn on the connected component and start playing the source.
3
Adjust the volume.
You can adjust the auxiliary input level to avoid the sudden increase of the output
level (see “AUX ADJUST” on page 15).
4
—
Adjust the sound as you want (see page 12).
Connecting an external component to the AUX input jack
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : MP3/WMA: Repeats current folder
RANDOM
FOLDER RND : MP3/WMA: Randomly plays all
tracks of current folder, then
tracks of next folders
ALL RND : Randomly plays all tracks
• To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
• To return to the previous menu, press BACK.
3.5 mm stereo mini plug
(not supplied)
Portable audio player, etc.
Selecting the playback modes
You can use only one of the following playback modes
at a time.
1
2
3
[Turn] = [Press]
REPEAT Ô RANDOM
[Turn] = [Press]
EN10-17_KD-R303_006A_2.indd 11EN10-17_KD-R303_006A_2.indd 11 22/8/08 9:50:41 AM22/8/08 9:50:41 AM
To Next Page
Loading...
Need help?
General
