ENGLISH
8
Listening to the radio
1
Select “FM” or “AM.”
2
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display,
then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, “ST”
lights up on the display.
When an FM stereo broadcast is
hard to receive
• See also page 14.
Reception improves, but stereo effect will be lost.
• “MO” lights up on the display.
To restore the stereo effect, repeat the same
procedure to select “MONO OFF.” The MO indicator
goes off.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to 18 stations for FM.
1 While listening to a station...
Select “TUNER” = “MONO”
= “MONO ON”
2 Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
To preset other 6 stations, repeat from step 1 again.
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6 stations
for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “P04.”
1
2 Select preset number “P04.”
3
[Turn] = [Press]
EN02-09_KD-R306_001A_f.indd 8EN02-09_KD-R306_001A_f.indd 8 20/8/08 3:32:30 PM20/8/08 3:32:30 PM
To Next Page
Loading...
Need help?
General
