JVC KD-R310 User Manual

Symptom
Disc cannot be played back.
1
I. Remedy/Cause
!
I- Use a disc with MP3IWMA tracks recorded in aformat •
I compliant with ISO 9660 Levell, Level 2, Romeo,
,
I orJoliet. .
I
I - Add the extension code <.mp3> or <.wma> to the file
names.
*~:-:<lJ II -----------t-' f h_~_·_~_· I d_
~ 1 rom anot er eVlce. Isconnect current y connecte
I device and search again.
~ I The unit does not detect the I- Check the Bluetooth setting ofthe device.
, Bluetooth device. I- Search from the Bluetooth device. After the device
! detects the unit, select "OPEN" on the unit to connect
I the device. (~ 10)
Noise is generated.
I Skip to another track or change the disc. (Do not add
~
Ithe extension code <.mp3> or <.wma> to non-MP3 or
u
I WMA tracks.)
m
..D
>.
!
m
A longer readout time is
I Do not use too many hierarchical levels and folders.
0-
«
required ("READING" keeps
I
~
,
~
flashing on the display).
I
(V)
Q..
~
Tracks do not play back in the
The playback order is determined when the files are
order you have intended them recorded.
to play.
The elapsed playing time is not
This sometimes occurs during playback. This is caused
correct.
by how the tracks are recorded on the disc.
The correct characters are not
This unit can only display letters (upper case), numbers,
displayed(e.g. album name). 1 and a limited number of symbols.
Bluetooth device does not
The unit can be connected with one Bluetooth mobile
detect the unit.
Iphone and one Bluetooth audio device at atime.
While connecting a device, this unit cannot be detected
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
~
ENGLISH I 31

JVC KD-R310 Specifications

General

Brand	JVC
Model	KD-R310
Category	Car Receiver
Language	English