For details, refer also to the instructions supplied with the external components.
Playing an external component from Front/Rear AUX
Portable audio
player, etc.
3.5 mm stereo mini plug
(not supplied)
3.5 mm stereo mini plug
(with “L” shaped connector)
(not supplied)
1
Connect to F-AUX on the control panel
and/or R-AUX on the rear panel.
-<SRC SELECT>
-<F-AUX>/<R-AUX>
-<F-AUX ON> or
<R-AUX ON>
Press MENU to exit.
2
Set the source as necessary.
3
Select <F-AUX> or <R-AUX>.
4
Turn on the connected component and
start playing the source.
Recommended to use a 3-terminal plug head stereo mini plug for optimum audio output.
Otherwise, sound may be interrupted or unclear while listening to an external component.
Bluetooth
姞
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100
(separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of
the unit. ('Installation/Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you
purchased this unit.
Operations may be different depending on the connected Bluetooth device. For
details, refer also to the instructions supplied with the device.
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1
Register (pair) a Bluetooth device with KS-BTA100.
-<SRC SELECT>
-<R-AUX>
-<BT ADAPTER>
2
Change the <SRC SELECT> settings of this unit.
(Hold)
3
Press MENU to exit.
External components
External components
10
|ޓENGLISH
2011/10/3ޓ19:21:12KD-R531_E_EN
To Next Page
Loading...
Need help?
General
