JVC KD-R605 User Manual

ENGLISH
7OPERATIONS
Preparation
Canceling the display demonstration and setting the clock
• See also page 23.
1
Turn on the power.
2
[Turn] = [Press]
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK” = “CLOCK SET.”
Adjust the hour, then press control dial once to proceed to
adjust the minute.
• To return to the previous menu, press BACK.
Changing the display information
When the power is turned off: The current clock time is displayed if “CLOCK DISP” is set to “CLOCK OFF,”
(see page 23).
When the power is turned on: The display information of the current source changes as follows:
FM/AM Frequency = Clock = Station name *
1
= (back to the beginning)
CD/CD-CH
CD/USB/USB-IPOD/
CD-CH
Audio CD/CD Text: Disc title/performer *
2
= Track title *
2
= Current track number
with the elapsed playing time = Current track number with the
clock time = (back to the beginning)
MP3/WMA *
5
: Album name/performer (folder name) *
3,
*
4
= Track title (file
name) *
3,
*
4
= Current track number with the elapsed playing
time = Current track number with the clock time = (back to
the beginning)
IPOD Album name/Artist name
= Track name = Current track number with the
elapsed playing time = Current track number with the clock time = (back to the
beginning)
*
1
If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 21.
*
2
If the current disc is an audio CD, “NO NAME” appears.
*
3
If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 23),
folder name and file name appear.
*
4
Not applicable for “USB-IPOD.”
*
5
WMA is not applicable for “CD-CH.”
Press and hold until the
main menu is called up.
• Repeat this procedure.
EN02-11_KD-R606_001A_f.indd 7EN02-11_KD-R606_001A_f.indd 7 12/18/08 5:30:43 PM12/18/08 5:30:43 PM

JVC KD-R605 Specifications

General

Brand	JVC
Model	KD-R605
Category	Car Receiver
Language	English