24 ENGLISH
Category
Menu item Selectable setting, [Initial: Underlined]
TUNER
SSM *
3
Strong-station
Sequential
Memory
• SSM 01 – 06
• SSM 07 – 12
• SSM 13 – 18
: For settings,
7.
MONO *
3
Monaural mode
• MONO ON
• MONO OFF
: Activate monaural mode to improve FM
reception, but stereo effect will be lost. (
7)
: Restore the stereo effect.
IF BAND
Intermediate
frequency band
• AUTO
• WIDE
: Increases the tuner selectivity to reduce
interference noises between adjacent stations.
(Stereo effect may be lost.)
: Subject to interference noises from adjacent
stations, but sound quality will not be
degraded and the stereo effect will remain.
AUDIO
FADER *
4
R06 – F06
[ 00 ]
: Adjust the front and rear speaker output
balance.
BALANCE *
5
L06 – R06
[ 00 ]
: Adjust the left and right speaker output
balance.
LOUD
Loudness
• LOUD ON
• LOUD OFF
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
VOL ADJUST
Volume adjust
VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ]
: Preset the volume adjustment level of
each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.
• Before making an adjustment, select the
source you want to adjust.
• “VOL ADJ FIX” appears on the display if “FM”
is selected as the source.
L/O MODE
Line output
mode
• SUB.W
• REAR
: Select if the REAR LINE OUT terminals are
used for connecting a subwoofer (through an
external amplifier).
: Select if the REAR LINE OUT terminals are
used for connecting the speakers (through an
external amplifier).
*
3
Displayed only when the source is “FM.”
*
4
If you are using a two-speaker system, set the fader level to “00.”
*
5
This adjustment will not affect the subwoofer output.
EN22-29_KD-R716_001A_f.indd 24EN22-29_KD-R716_001A_f.indd 24 12/17/09 3:05:32 PM12/17/09 3:05:32 PM
To Next Page
Loading...
Need help?
General
