EasyManuals Logo
Home>JVC>Car Receiver>KD-R721BT

JVC KD-R721BT User Manual

JVC KD-R721BT
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18 ENGLISH
1
2
]
<BLUETOOTH>
3
Repeat step 2 to select a setting item (see
table below), then repeat the procedure
to change the setting accordingly.
To return to the previous menu, press
T/P BACK.
To exit from the menu, press MENU.
[Hold]
Menu item
Selectable setting, [
Initial: Underlined
]
CONNECT PH*
1
/
CONNECT AU
Turn the control dial to select a device you want to connect. “CONNECTED”
=
“[Device Name]”
scrolls on the display when the device is connected.
DISCONNT PH/
DISCONNT AU
Turn the control dial to select a device you want to disconnect. “DISCONNECT”
=
“[Device Name]” scrolls on the display when the device is disconnected.
DELETE PAIR
Turn the control dial to select the device you want to delete, then press the control dial to confirm.
DELETE YES
: Confirm to delete the selected device. /
DELETE NO
: Cancels.
P. BOOK WAIT
You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need
to enter the PIN code or verify passkey from the mobile phone to do pairing. You can transfer a
maximum of 400 numbers.
SET PINCODE
You can change the PIN code of your choice before pairing (1-digit to 6-digit number).
[ Initial:
0000
]
Turn the control dial to select a number, press
4
/
¢
to move to the entry position,
then press the control dial to confirm the entry.
AUTO CNNCT ON
: The connection is established automatically with the registered Bluetooth device when
you turn on the unit. /
OFF
: The unit does not connect the Bluetooth device automatically. Use
<CONNECT PH/ CONNECT AU> to connect.
INITIALIZE YES
: Initialize all the Bluetooth settings (including stored pairing, phonebook, and etc.). /
NO
: Cancels.
INFORMATION PH CNNT DEV *
2
: Shows connected phone name. /
AU CNNT DEV *
2
: Shows
connected audio device name. /
MY BT NAME
: Shows the unit name (JVC Unit). /
MY ADDRESS
: Shows address of USB Bluetooth Adapter.
*
1
Will not display if two Bluetooth phones are connected at the same time.
*
2
Displayed only when a Bluetooth phone/audio player is connected.
Changing the Bluetooth settings
EN02-29_KD-R721BT_003A_f.indd 18EN02-29_KD-R721BT_003A_f.indd 18 1/13/11 9:47:22 AM1/13/11 9:47:22 AM

Other manuals for JVC KD-R721BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-R721BT and is the answer not in the manual?

JVC KD-R721BT Specifications

General IconGeneral
MP3 playbackYes
Audio formats supportedMP3, WAV, WMA
Tuner typeHS-IV
Output power200 W
Audio output channels4.0 channels
Maximum power per channel50 W
I/O portsUSB x 2 AUX-IN

Related product manuals