8 ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and
6 stations for AM.
1
]
Tune in to a station you want to
preset.
2
“PRESET MODE” flashes.
3
]
Selects a preset number.
Preset number flashes and “MEMORY”
appears.
Selecting a preset station
or
1
2
Using the remote controller
5
/
∞
: Changes the preset stations.
2
/
3
: [Press] Searches for stations
automatically.
[Hold] Searches for stations manually.
Changing the display information (for
non-Radio Data System station)
Frequency Clock
[Hold]
Searching for your favourite
FM Radio Data System
programme—
PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
The last selected PTY code appears.
2
]
Select one of your favourite
programme types or a PTY code
(page 9), and start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• If the volume is adjusted during reception of
traffic announcement, the adjusted volume
is memorized automatically. It will be applied
the next time Traffic Announcement function
is turned on.
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press T/P BACK
again.
The following features are available only
for FM Radio Data System stations.
[Hold]
EN02-29_KD-R721BT_003A_f.indd 8EN02-29_KD-R721BT_003A_f.indd 8 1/13/11 9:47:00 AM1/13/11 9:47:00 AM
To Next Page
Loading...
Need help?
General
