7
Use a portable audio player
1 Connect a portable audio player (commercially available).
2 Select
[ON]
for
[AUX]
in
[SRC SELECT]
.
(
«
4)
3 Press L SOURCE to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for
optimum audio output.
3.5 mm (1/8") stereo mini plug with “L” shaped
connector (commercially available)
Portable audio player
Auxiliary input jack
ILLUMINATION
(
KD-A845BT
/
KD-R840BT
only)
1 Press and hold MENU.
2 Turn the volume knob to select
[COLOR]
or
[COLOR SETUP]
, then press the knob.
3 Turn the volume knob to make a selection (see the following table), then press the knob.
4 Press MENU to exit.
Default:
XX
COLOR
: Select a color for each zone separately.
1
BTN ZONE 1 / BTN ZONE 2 / BTN ZONE 3 / DISP ZONE / VOL ZONE / ALL ZONE: Select a zone.
2
COLOR 01 to COLOR 29: Select a color.
USER: Select a user color (created in [COLOR SETUP]).
COLOR FLOW 01 to COLOR FLOW 03: Select a color changes pattern/speed.
SPECTRUM / GROOVE / TECHNO / EMOTION / RELAX / NIGHTSWEEP: (Selectable only if [ALL ZONE] is selected in
step
1
.)
(Default:
BTN ZONE 1 / BTN ZONE 2 / ALL ZONE: [06] ; BTN ZONE 3: [27] ; DISP ZONE: [01] ; VOL ZONE:
[COLOR FLOW 02])
COLOR SETUP
: Store your own day and night colors for each zone
separately.
DAY COLOR
1
BTN ZONE 1 / BTN ZONE 2 / BTN ZONE 3 / DISP ZONE / VOL ZONE: Select a zone.
2
RED / GREEN / BLUE: Select a primary color.
3
00 to 31: Select the level.
Repeat steps
2
and
3
for all the primary colors.
• Your setting is stored to [USER] in [COLOR].
• If [00] is selected for all primary colors for [DISP ZONE], nothing appears on the display.
NIGHT COLOR
COLOR GUIDE
OFF: Changes the display and buttons illumination to white when settings are performed on menu
and list search. ; ON: Display and buttons illumination remain the same even in menu and list search
operation.
[NIGHT COLOR]
or
[DAY COLOR]
is changed by turning on or off your car’s headlight.
AUX
Character search
(
KD-A845BT
/
KD-R840BT
only)
If you have many folders or tracks/files, you can search through
them quickly according to the first character (A to Z, 0 to 9 and
OTHERS).
• “OTHERS” appear if the first character is other than A to Z, 0 to
9.
1 Press MENU .
2 For iPod: Turn the volume knob to select the desired list,
then press the knob.
For MP3/WMA/WAV: Go to step
3.
3 Press 1 ∞ / 2 5 to select the desired character.
4 Turn the volume knob to select the desired folder or
track/file, then press the knob.
CD / USB / iPod
ENGLISH
To Next Page
Loading...
Need help?
General
