JVC KD-R756 User Manual

11
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
FADER
*
2
*
5
R06 — F06 ( 00 ):Adjusts the front and rear speaker output balance.
BALANCE
*
2
*
5
L06 — R06 ( 00 ):Adjusts the left and right speaker output balance.
VOL  ADJUST –05 — +05 ( 00 ):Presets the volume adjustment level of each
source (compared to the FM volume level). Before adjustment,
select the source you want to adjust. (“VOLADJFIX” appears if FM is
selected.)
AMP  GAIN LOW  POWER :Limits the maximum volume level to 30. (Select if
the maximum power of each speaker is less than 50W to prevent
damaging the speakers.);
HIGH POWER :The maximum volume
level is 50.
D.T.EXP
(Digital Track
Expander)
ON :Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;
OFF :Cancels.
TEL  MUTING
*
6
ON :Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).;
OFF :Cancels.
L/O  MODE SUB.W / REAR :Selects whether rear speakers or a subwoofer are
connected to the REAR/SW line out terminals on the rear panel
(through an external amplifier).
*
1
Displayed only when [L/O  MODE] is set to [SUB.W] and [SUB.W] is set
to
[ON] .
*
2
This adjustment will not affect the subwoofer output.
*
3
Displayed only when [SUB.W] is set to [ON] .
*
4
Displayed only when [L/O  MODE] is set to [SUB.W] .
*
5
If you are using a two-speaker system, set the fader level to [00] .
*
6
Does not work if [BT  ADAPTER] is selected for [AUX] in [SRC  SELECT] .
AUDIO SETTINGS
KD-R756
KD-R656 / KD-R456 / KD-R455 / KD-R454
KD-R556
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step
2 until the desired item is selected.
• To return to the previous setting item or hierarchy, press G.
• To cancel, press MENU.
Default:
XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
AUTO :Changes between the day and night adjustments when you turn off or on
the car headlights. *
1
; ON :Selects the night adjustments.; OFF :Selects the day
adjustments.
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level ( 00 to 31 ). (Default: DAY : 31 ; NIGHT : 15 )
SCROLL *
2
ONCE :Scrolls the display information once.; AUTO :Repeats scrolling at 5-second
intervals.;
OFF :Cancels.
*
1
The illumination control wire connection is required. ( 17)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
DISPLAY SETTINGS
EN_KD-R756[U]4.indd 11EN_KD-R756[U]4.indd 11 11/10/2013 3:38:45 PM11/10/2013 3:38:45 PM

JVC KD-R756 Specifications

General

Brand	JVC
Model	KD-R756
Category	Car Receiver
Language	English