EasyManuals Logo
Home>JVC>Car Receiver>KD-R761

JVC KD-R761 User Manual

JVC KD-R761
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Symptom Remedy
General
Sound cannot be heard. Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [
SRCSELECT
] setting. (
4
)
Radio
Radio reception is poor.
Static noise while
listening to the radio.
Connect the antenna firmly.
Pull the antenna out all the way.
CD / USB / iPod
Disc cannot be ejected.
Press and hold
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected.
“IN DISC” appears. Make sure nothing is blocking the loading slot when you
eject the disc.
“PLEASE” and “EJECT”
appear alternately.
Press
, then insert the disc correctly.
Playback order is not as
intended.
The playback order is determined by the file name (USB)
or the order in which files were recorded (disc).
Elapsed playing time is
not correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format. (
13
)
“READING” keeps flashing. Do not use too many hierarchical levels and folders.
Reload the disc or reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
Check whether the connected device is compatible with this
unit and ensure the files are in supported formats. (
13)
Reattach the device.
The iPod/iPhone does not
turn on or does not work.
Check the connection between this unit and iPod/iPhone.
Detach and reset the iPod/iPhone using hard reset.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers, and
a limited number of symbols. Uppercase Cyrillic letters
can also be displayed if [
РУССКИЙ
] is selected. (
4
)
TROUBLESHOOTING
Symptom
Remedy
ANDROID
Sound cannot be heard
during playback.
Sound output only from
the Android device.
Reconnect the Android device.
If in [
AUDIO MODE
], launch any media player
application on the Android device and start playback.
If in [
AUDIO MODE
], relaunch the current media player
application or use another media player application.
Restart the Android device.
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. (
13
)
Cannot playback at [
AUTO
MODE
].
Make sure JVC MUSIC PLAY APP is installed on the
Android device. (
5
)
Reconnect the Android device and select the appropriate
control mode. (
6
)
If this does not solve the problem, the connected Android
device does not support [
AUTO MODE
]. (
13
)
“NO DEVICE” or “READING”
keeps flashing.
Switch off the developer options on the Android device.
Reconnect the Android device.
If this does not solve the problem, the connected Android
device does not support [
AUTO MODE
]. (
13
)
Playback is intermittent or
sound skips.
Turn off the power saving mode on the Android device.
“CANNOT PLAY” Make sure Android device contains playable audio files.
Reconnect the Android device.
Restart the Android device.
If you still have troubles, reset the unit. ( 3)
Available Cyrillic letters
Available characters
Display indications
JS_JVC_KD_R761_E_EN_00_3.indd 14JS_JVC_KD_R761_E_EN_00_3.indd 14 4/8/2014 10:29:12 AM4/8/2014 10:29:12 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-R761 and is the answer not in the manual?

JVC KD-R761 Specifications

General IconGeneral
BrandJVC
ModelKD-R761
CategoryCar Receiver
LanguageEnglish

Related product manuals