JVC KD-R781BT User Manual

ENGLISH
30
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
How to remove the unitWhen installing without the mounting
sleeve
1 Remove the mounting sleeve and trim plate from
the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
Use only the specified screws. Using wrong screws
might damage the unit.
Installing the unit (in-dash mounting)
Do the required wiring.
( 31)
Bend the appropriate tabs to
hold the sleeve firmly in place.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Dashboard of
your car
INSTALLATION/CONNECTION
Part list for installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
Output terminals
For 2-way crossover setting
KD-R881BT REAR
FRONT
SW
: Rear output
: Front output
: Subwoofer output
KD-R781BT FRONT
REAR/SW
: Front output
: Rear/subwoofer output
For 3-way crossover setting
KD-R881BT REAR
FRONT
SW
: Tweeter output
: Mid Range output
: Woofer output
KD-R781BT FRONT
REAR/SW
: Mid Range output
: Woofer output
JS_JVC_KD_R881BT_M_EN_6.indd 30JS_JVC_KD_R881BT_M_EN_6.indd 30 2/9/2016 3:09:36 PM2/9/2016 3:09:36 PM

JVC KD-R781BT Specifications

General

Brand	JVC
Model	KD-R781BT
Category	Car Receiver
Language	English