JVC KD-R800 User Manual

ENGLISH
9OPERATIONS
Listening to the radio
1
Select “ FM ” or “ AM .”
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search. Hold either one of the
buttons until “M” appears on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the
indicator lights up on the display.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 33.
<Tuner> <Stereo/Mono>
<Mono>
Reception improves, but stereo effect will be lost. The
lights up on the display.
To restore the stereo effect, repeat the same
procedure to select <Stereo>.
[Turn] = [Press]
Storing stations in memory
Automatic presetting (FM)— SSM (Strong-
station Sequential Memory)
You can preset up to 18 stations for FM.
1 While listening to a station, enter “SSM”
screen.
2 Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press 4 /¢ .
• If an HD Radio tuner box is connected, you can
also search and store the AM stations.
To preset other 6 stations, repeat from step 1 again.
Continued on the next page
“SSM 01–06”
“SSM 07–12”
“SSM 13–18”
EN02-09_KD-A805[J]2.indd 9EN02-09_KD-A805[J]2.indd 9 1/6/09 3:34:30 PM1/6/09 3:34:30 PM

JVC KD-R800 Specifications

General

Brand	JVC
Model	KD-R800
Category	Car Receiver
Language	English