ENGLISH
31SETTINGS
Setting the time for dimmer
You can set the start/end time for dimmer.
1
<Display> <Dimmer>
<Time Set>
2 Adjust the dimmer start time.
3 Adjust the dimmer end time.
4 Exit from the setting.
[Turn] = [Press]
[Turn] = [Press]
[Turn] = [Press]
or
Changing the Bluetooth
setting
You can change the settings listed on the following
according to your preference.
Preparation:
• Connect the supplied USB Bluetooth Adapter
(KS-UBT1) to one of the USB input terminals of the
unit.
1
<Bluetooth> <Settings>
2 Select a setting item.
<Quick Call> Ô <Auto Connect> Ô
<Auto Answer> Ô <Message Notice>*
Ô <MIC Setting> Ô <Ringing Tone>
Ô <Phonebook Trans> Ô
<Phonebook Select> Ô <Initialize> Ô
<Information>Ô (back to the beginning)
* If the connected Bluetooth phone does not support
Text Message notification (via Bluetooth), the unit
will not receive any notification upon the arrival of
a Text Message even when <Message Notice>
is set to <On>.
3 Change the setting accordingly.
[Turn] = [Press]
[Turn] = [Press]
[Turn] = [Press]
Continued on the next page
EN24-31_KD-R805_001A_2.indd 31EN24-31_KD-R805_001A_2.indd 31 1/6/09 4:37:12 PM1/6/09 4:37:12 PM
To Next Page
Loading...
Need help?
General
