JVC KD-R811 User Manual

20 ENGLISH
Warning messages
Connection Error
The device is registered but the connection
has failed. Use <Connect Phone / Connect
Audio> to connect the device again.
( 16)
Error
Try the operation again. If “Error” appears
again, check if the device supports the
function you have tried.
Please Wait...
The unit is preparing to use the Bluetooth
function. If the message does not disappear,
turn off and turn on the unit, then connect
the device again (or reset the unit).
Please Reset...
Reset the unit and try the operation again.
If “Please Reset...” appears again, consult
your nearest JVC IN-CAR ENTERTAINMENT
dealers.
Changing the Bluetooth
settings
1
2
] <Bluetooth> ] <Setting>
3
] Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press
T/P BACK .
• To exit from the menu, press DISP or MENU .
Selecting the playback modes
• For Bluetooth devices that support AVRCP 1.3.
1
2
] “Repeat” j “Random”
3
Repeat
Track
All
Group
: Repeats current track
: Repeats all tracks
: Repeats all track of current
group
Random
All
Group
: Randomly plays all tracks
: Randomly plays all track of
current group
To cancel repeat play or random play, select
“Off.”
• To return to the previous menu, press
T/P BACK .
Bluetooth Information:
If you wish to receive more information
about Bluetooth, visit the following JVC web
site: <http://www.jvc.co.jp/english/car/>
(English website only)
[Hold]
[Hold]
EN20-27_KD-R811_003A_3.indd 20EN20-27_KD-R811_003A_3.indd 20 12/30/09 2:30:50 PM12/30/09 2:30:50 PM

JVC KD-R811 Specifications

General

Brand	JVC
Model	KD-R811
Category	Car Receiver
Language	English