ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
KD-R864BT / KD-R862BT / KD-R861BTKD-R961BT
1 Press and hold .
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [
BRIGHTNESS
]
setting.
OFF
:Selects the day adjustments.;
ON
:Selects the night adjustments.;
DIMMER TIME
:Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [
ON
] time, then press the knob.
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]: 18:00 or 6:00 PM
[
OFF
]: 6:00 or 6:00 AM)
AUTO
:Changes between the day and night adjustments when you turn off or
on the car headlights. *
1
For
KD-R961BT
, the display and button colors change according to the
settings made on [
COLOR
].
DISPLAY SETTINGS
BRIGHTNESS
Sets the button, display and USB input terminal brightness for day and
night separately.
1
DAY
/
NIGHT
:Select day or night.
2
Select a zone for setting.
( Illustration on left)
3
Set the brightness level (
00
to
31
).
(Default:
KD-R961BT
:
DAY
:
31
;
NIGHT
:
11
KD-R864BT
/
KD-R862BT
/
KD-R861BT
:
BUTTONZONE
:
DAY
:
25
;
NIGHT
:
09
DISPZONE
:
DAY
:
31
;
NIGHT
:
12
)
SCROLL
*
2
ONCE
:Scrolls the display information once.;
AUTO
:Repeats scrolling at
5-second intervals.;
OFF
:Cancels.
COLOR
(for
KD-R961BT
)
PRESET
You can select a color for [
ALLZONE
], [
ZONE1
], [
DISPZONE
], or [
ZONE2
]
separately. For [
ALL ZONE
], you can also select a color pattern.
Default color:
ALLZONE
: [
COLOR06
],
ZONE 1
: [
COLOR06
],
DISPZONE
: [
COLOR01
],
ZONE 2
: [
COLOR27
]
1
Select a zone for setting.
( Illustration on left)
2
Select a color for the selected zone.
•
COLOR01
to
COLOR29
•
USER
: The color you have created for [
DAYCOLOR
] or
[
NIGHTCOLOR
] is shown.
•
COLORFLOW01
to
COLORFLOW03
: Color changes at different
speeds.
•
GROOVE
/
TECHNO
/
EMOTION
/
RELAX
/
SPECTRUM
/
SWEEP
/
POP
: The selected color pattern is shown.*
3
(Selectable only when
[
ALLZONE
] is selected in step
1
.)
*
1
The illumination control wire connection is required.
( 25)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [
ZONE1
], [
DISPZONE
], [
ZONE2
] illumination
color will change to the default color.
JS_JVC_KD_R961BT_E_EN_20_1.indd 17JS_JVC_KD_R961BT_E_EN_20_1.indd 17 20/10/2014 11:09:31 AM20/10/2014 11:09:31 AM
To Next Page
Loading...
Need help?
General
