10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– All the buttons flash.
– The unit answers the call automatically if [
AUTO ANSWER
] is set to a selected time. (
11
)
During a call:
– The buttons and display illuminate according to the settings made for [
COLOR
]. (
17
)
– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate On the remote control
Answer a call
Press
or the volume knob.
Press
.
Reject a call
Press and hold
or the volume
knob.
Press and hold
.
End a call
Press and hold
or the volume
knob.
Press and hold
.
Adjust the phone
volume
[
00
] to [
50
] (Default: [
15
]*)
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
—
Switch between hands-
free and private talk
modes
Press the volume knob during a call.
• Operations may vary according to the
connected Bluetooth mobile phone.
—
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to make a selection
(
see the following table
)
, then press the
knob.
3 Repeat step 2 until the desired item is
selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
MIC LEVEL
–10
—
+10
(
–4
):The sensitivity of
the microphone increases as the number
increased.
NOISE RDCT –5
—
+5
(
0
):Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5
—
+5
(
0
):Adjust the echo
cancellation delay time until the least
echo is being heard during a phone
conversation.
BLUETOOTH®
JS_JVC_KD_R961BT_E_EN_ff.indd 10JS_JVC_KD_R961BT_E_EN_ff.indd 10 29/9/2014 4:17:53 PM29/9/2014 4:17:53 PM
To Next Page
Loading...
Need help?
General
