ENGLISH
21
PRO EQ
(For
KD-AR865BTS
)
1
USER1
/
USER2
:Select a preset name.
2
BASS
/
MID BASS
/
MID
/
MID HIGH
/
HIGH
:Select a sound tone.
3
Adjust the sound elements of the selected sound tone.
BASS
Frequency:
63
/
80
/
100
/
125HZ
(
Default:
80HZ
Level:
–10
to
+10
00
Q:
Q1.0
/
Q1.25
/
Q1.5
/
Q2.0
Q1.25
)
MID BASS
Frequency:
200
/
250
/
315
/
400HZ
(Default:
250HZ
Level:
–10
to
+10
00
Q:
Q1.0
/
Q1.25
/
Q1.5
/
Q2.0
Q1.25
)
MID
Frequency:
630/ 800HZ
/
1.0
/
1.25KHZ
(Default:
800HZ
Level:
–10
to
+10
00
Q:
Q0.75
/
Q1.0
/
Q1.25
/
Q2.0
Q1.0
)
MID HIGH
Frequency:
2.0
/
2.5
/
3.15
/
4.0KHZ
(Default:
2.5KHZ
Level:
–10
to
+10
00
Q:
Q0.75
/
Q1.0
/
Q1.25
/
Q2.0
Q1.0
)
HIGH
Frequency:
6.3
/
8.0
/
10.0
/
12.5KHZ
(Default:
8.0KHZ
Level:
–10
to
+10
00
Q:
Q0.75
/
Q1.0
/
Q1.25
/
Q2.0
Q1.0)
AUDIO
BASS BOOST
+01
/
+02
: Selects your preferred bass boost level.;
OFF
:Cancels.
LOUD 01
/
02
:Boosts low or high frequencies to produce a well-balanced sound at
low volume.;
OFF
:Cancels.
SUB.W
LEVEL
*
5
SPK-OUT
*
6
00
to
+06
(
+03
):Adjusts the output level of the subwoofer
connected via speaker lead. (
31, 32
)
PRE-OUT
*
7
–08
to
+08
(
00
):Adjusts the output level of the subwoofer
connected to the lineout terminals (SW or REAR/SW)
through an external amplifier. (
31, 32
)
SUB.W
*
7
ON
/
OFF
: Turns on or off the subwoofer output.
SUB.W
LPF
*
5
THROUGH
:All signals are sent to the subwoofer. ;
LOW
55HZ
/
MID
85HZ
/
HIGH120HZ
:Audio signals with frequencies lower than 55Hz/ 85Hz/
120Hz are sent to the subwoofer.
SUB.WPHASE
*
5
REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [
THROUGH
] is selected for
[
SUB.W
LPF
].)
HPF
(For
KD-AR865BTS
)
OFF
:All signals are sent to the front/rear speakers.;
LOW
100HZ
/
MID
120HZ
/
HIGH150HZ
:Audio signals with frequencies lower than
100Hz/ 120Hz/ 150Hz are cut off from the front/rear speakers.
FADER R06
—
F06
(
00
):Adjusts the front and rear speaker output balance.
BALANCE
*
8
L06
—
R06
(
00
):Adjusts the left and right speaker output balance.
VOL
ADJUST –05
—
+05
(
00
):Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. (“VOLADJFIX” appears if FM is selected.)
AMP
GAIN LOW
POWER
:Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50W to prevent damaging
the speakers.);
HIGHPOWER
:The maximum volume level is 50.
D.T.EXP
(Digital Track
Expander)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression.;
OFF
:Cancels.
SPK/PRE
OUT
Selects the appropriate setting to get the desired output. (
22
).
*
5
Displayed only when [
SUB.W
] is set to [
ON
].
*
6
Displayed only when [
SPK/PRE
OUT
] is set to [
SUB.W/SUB.W
]. (
22
)
*
7
For unit with 3-pair lineout terminals: Displayed only when [
SPK/PRE
OUT
] is set to
[
REAR/REAR
] or [
SUB.W/SUB.W
]. (
22
)
For unit with 2-pair lineout terminals: Displayed only when [
SPK/PRE
OUT
] is set to
[
REAR/SUB.W
] or [
SUB.W/SUB.W
]. (
22
)
*
8
This adjustment will not affect the subwoofer output.
AUDIO SETTINGS
To Next Page
Loading...
Need help?
General
