JVC KD-R960BTS User Manual

4
GETTING STARTED
Cancel the demonstration
1
Press and hold .
2 Turn the volume knob to select [ DEMO ], then press the knob.
3 Turn the volume knob to select [ DEMOOFF ], then press the knob.
4 Press to exit.
Set the clock
1
Press and hold .
2 Turn the volume knob to select [ CLOCK ], then press the knob.
3 Turn the volume knob to select [ CLOCKSET ], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day
Hour Minute
5 Turn the volume knob to select [ 24H/ 12H ], then press the knob.
6 Turn the volume knob to select [ 12 HOUR ] or [ 24 HOUR ], then press the
knob.
7 Press to exit.
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold .
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
1
2
Default: XX
SETTINGS
BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SRC SELECT
AM
* ON :Enables AM in source selection.; OFF :Disables.
PANDORA * ON :Enables PANDORA in source selection.; OFF :Disables.
IHEART * ON :Enables IHEARTRADIO in source selection.; OFF :Disables.
AUX * ON :Enables AUX in source selection.; OFF :Disables.
F/W UPDATE
SYSTEM / BLUETOOTH
F/W xxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
CLOCK
CLOCK SYNC
AUTO :The clock time is automatically set using the Clock Time (CT) data
in FM Radio Broadcast Data System signal.;
OFF :Cancels.
CLOCK DISP ON :The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_R960BTS_J_EN_01.indd 4 7/7/2014 2:16:59 PM

JVC KD-R960BTS Specifications

General

Brand	JVC
Model	KD-R960BTS
Category	Car Receiver
Language	English