JVC KD-R980BTS User Manual

ENGLISH
35
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
Car fuse block
Ignition switch
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle factory wiring
harness does not have “12V ignition switch” wire.
Separate red wire
Wiring connection
Signal cord (not supplied)
Remote wire (not supplied)
To the steering wheel
remote control adapter
Fuse (10A)
Antenna terminal
JVC Amplifier *
1
Factory wiring
harness (vehicle)
Black: Ground
Yellow: Battery 12V
White: Front speaker/For 3-way crossover: mid range speaker (left)
White/black
Gray: Front speaker/For 3-way crossover: mid range speaker (right)
Gray/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Join the same color wires together.
Red: Ignition 12V
Orange/white: Illumination
(Not used)
Blue/white: Remote (200mA max.)
For
KD-R980BTS :
MIC (microphone input terminal)
( 14)
For KD-R880BT :
Microphone input jack
( 14)
For KD-R980BTS :
Expansion port (12 V
500mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 11)
Output terminals ( 34 )
Brown
Green: Rear speaker
*
2
/For 3-way crossover: Tweeter (left)
Green/black
*
2
*
1
Firmly connect the ground wire of the amplifier to the
car’s chassis to avoid damaging the unit.
*
2
You can also connect a subwoofer speaker directly
using this lead without an external subwoofer
amplifier. For setting,
24 .
Custom wiring
harness
(separately
purchased)
IMPORTANT
We recommend installing the unit with a commercially available custom
wiring harness specific for your car and leave this job to professionals for your
safety. Consult your car audio dealer.
Vehicle
dashboard
Recommended connection
JS_JVC_KD_R980BTS_K_EN_4.indd 35JS_JVC_KD_R980BTS_K_EN_4.indd 35 20/5/2016 2:22:55 PM20/5/2016 2:22:55 PM

JVC KD-R980BTS Specifications

General

Brand	JVC
Model	KD-R980BTS
Category	Car Receiver
Language	English