JVC KD-R990BTS User Manual

ENGLISH
19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BATT/SIGNAL
*
KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-RD99BTS / KD-R99MBS :
AUTO :Shows the strength of the battery and signal when the unit detects a
Bluetooth device and the Bluetooth device is connected.;
OFF :Cancels.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to
another phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press
.
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• “<” indicates call received, “>“ indicates call made, “M” indicates call
missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2 Press the volume knob to call.
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Press to select the desired letter (A to Z, 0to9, and OTHERS).
• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
BLUETOOTH®
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character
(
, #, +).
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command
to control the phone functions.
( Make a call using voice
recognition)
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer
to the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] , [PHONEBOOK] or
[DIAL NUMBER] , then press the knob.
3 Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact
is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER] in
step
2 and store a blank number.
JS_JVC_KD_R995BTS_K_EN_03.indd 19JS_JVC_KD_R995BTS_K_EN_03.indd 19 7/6/2017 8:40:52 AM7/6/2017 8:40:52 AM

JVC KD-R990BTS Specifications

General

Brand	JVC
Model	KD-R990BTS
Category	Car Receiver
Language	English