JVC KD-S871R User Manual

1-10
KD-S871R
Prior to performing the following procedure, remove
the CD mechanism control board and the front
bracket (loading motor).
Remove the three screws D and the damper
bracket.
Raise the both sides fix arms and move the fix plates
in the direction of the arrow to place the four shafts g
as shown in Fig.8 and 9.
Remove the CD mechanism assembly and the two
springs h attaching the flame.
Remove the two screws E and both sides rear
damper brackets from the dampers. Detach the CD
mechanism assembly from the left side to the right
side.
1.
2.
3.
4.
Removing the CD mechanism assembly
(See Fig.1, 6 to 9)
The CD mechanism assembly can be
removed if only the rear damper
bracket on the left side is removed.
ATTENTION:
Fig.6
Fig.7
Fig.8
Fig.9
Rear damper bracket
Fix arm (R)
Damper
D
D
Damper bracket
CD mechanism
assembly
Flame
h
h
D
D
Fig.5
Front bracket
CD mechanism
control board
Damper bracket
h
c
d
b
a
D
D
D
CD mechanism assembly
A
e
Fix plate (L)
g
g
Rear damper bracket
Fix arm (L)
Damper
E
Fix plate(R)
E
g
g
h

JVC KD-S871R Specifications

General

Brand	JVC
Model	KD-S871R
Category	Car Receiver
Language	English