JVC KD-S871R User Manual

1-11
KD-S871R
Prior to performing the following procedure, remove
the CD mechanism control board, the front bracket
(loading motor) and the CD mechanism assembly.
Remove the two screws F and the feed motor
assembly.
1.
Removing the feed motor assembly
(See Fig.10)
Prior to performing the following procedure, remove
the CD mechanism control board, the front bracket
(loading motor), the CD mechanism assembly and
the feed motor assembly.
Detach the FD gear part of the pickup unit upward.
Then remove the pickup unit while pulling out the
part i of the FD screw.
1.
Remove the screw G attaching the nut push spring
plate and the pickup mount nut from the pickup unit.
Pull out the FD screw.
2.
Removing the pickup unit
(See Fig.10 and 11)
When reattaching the pickup unit,
reattach the part j of the pickup unit,
then the part i of the FD screw.
ATTENTION:
Prior to performing the following procedure, remove
the CD mechanism control board, the front bracket
(loading motor), the CD mechanism assembly and
the feed motor assembly.
Turn up the CD mechanism assembly and remove
the two springs k on both sides of the clamper arms.
Open the clamper arm upward.
Turn the turn table, and remove the two screws H
and the spindle motor.
1.
2.
Removing the spindle motor
(See Fig.12 and 13)
Fig.10
Fig.11
Fig.12
Fig.13
Spindle motor
k
k
Pickup unit
Part i
FD screw
Feed motor assembly
FD gear
Pickup unit
Part j
F
Nut push spring plate
Pickup mount nut
Pickup unit
FD screw
G
H
H

JVC KD-S871R Specifications

General

Brand	JVC
Model	KD-S871R
Category	Car Receiver
Language	English