25
ENGLISH
Refer also to “CD OPERATIONS” on pages
20 to 23.
Playing a disc
1
Open the control panel.
Note on One-Touch operation:
When a disc is already in the loading slot,
pressing CD CD-CH turns on the unit and starts
playback automatically.
2
Insert a disc into the loading slot.
The unit turns on,
draws the disc and
starts playback
automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3/WMA OPERATIONS
* WMA or MP3 indicator lights up depending on the
first detected file.
Notes:
• MP3/WMA discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 26.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 folders and
144 MP3/WMA files
Total file
number
Total folder
number
CD indicator
Current source indication
WMA or MP3 indicator*
EN25-28_KD-SC601[E_EX_EU]f.p65 10/3/03, 12:38 PM25
To Next Page
Loading...
Need help?
General
