11
ENGLISH
○○○○○○○○
Listening to the radio
1
Select the Tuner
2
Select the band (FM/AM)
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
3
Start searching for a station
“Auto Search” begins.
When a station is received, searching stops.
To stop searching, press the same button.
To tune in to a station manually
In step
3
above...
Radio Operations
Activate “Manual
Search.”
Select station
frequencies.
SOURCE
HoldHold
What information is shown on the display
The following information are shown commonly for tuner operations.
• If you press DISP on the control panel, the display will show the different information or
different screens (see page 14).
OK
BAND
FM1 FM2
FM3AM
Station Frequency (with its icon)
Current band
* To assign names to the stations, see page 35.
then
Station name assigned* (with its icon)
See page 12.
Preset number if any
08-14_KD-SHX705[U]f.p65 4/1/04, 3:20 PM11
To Next Page
Loading...
Need help?
General
