8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
5 Turn the volume knob to choose a color, then press the knob.
•
[COLOR01]
to
[COLOR49]
•
[USER]
: The color you have created for
[DAYCOLOR]
or
[NIGHTCOLOR]
is shown.
•
[COLORFLOW01]
to
[COLORFLOW03]
: Color changes at
different speeds.
•
[CRYSTAL]
/
[FLOWER]
/
[FOREST]
/
[GRADATION]
/
[OCEAN]
/
[RELAX]
/
[SUNSET]
: The selected color pattern is
shown. (Selectable only when
[ALLZONE]
is selected
in step4.)
6 Repeat step 4 and step 5 to set color for other zones.
7 Press to exit.
Other Information
For playback operations of AUX source, refer to the INSTRUCTION MANUAL
on the following website: <https://www.jvc.net/cs/car/>
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Speaker Impedance:
4Ω—8Ω
Operating Voltage:
12 V DC car battery
8 Press to exit the setting menu.
Note:
You need to set
[SPK/PRE OUT]
to
[REAR/SUB.W]
or
[SUB.W/SUB.W]
before you can
make the subwoofer level settings.
Illumination Color Setting
You can set your preferred illumination color for each zone.
1 Press and hold to enter menu settings.
2 Turn the volume knob clockwise to select
[COLOR]
, then press the knob.
3 Press the volume knob if
[PRESET]
is shown on the display.
4 Turn the volume knob to choose a zone (
[ALL ZONE]
,
[ZONE 1]
,
[ZONE 2]
),
then press the knob.
KD-SX38MBT_K_B5K-0997-00_EN_2nd Draft.indd 8KD-SX38MBT_K_B5K-0997-00_EN_2nd Draft.indd 8 14/6/2022 3:47:36 PM14/6/2022 3:47:36 PM
To Next Page
Loading...
Need help?
General
