JVC KD-SX38MBT User Manual

12
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE] on page15.
• A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see
[PHONESELECT] or [AUDIOSELECT] in [BTMODE] . (Page15)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page17)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• When the battery of the connected Bluetooth device runs low, “Device
Name”
“LOW BATTERY” appears.
• Refer to the instruction manual of the Bluetooth device for more
information.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the color you have selected in
[RING COLOR] .
(Page14)
• The unit answers the call automatically if
[AUTO ANSWER] is set to a selected
time. (Page14)
During a call:
• The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR] . (Page14)
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
Bluetooth®
KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 12KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 12 27/4/2022 12:01:09 PM27/4/2022 12:01:09 PM

JVC KD-SX38MBT Specifications

General

Brand	JVC
Model	KD-SX38MBT
Category	Receiver
Language	English