JVC KD-X100 User Manual

You can connect an external component to the AUX (auxiliary) input jack on the faceplate.
For details, refer also to the instructions supplied with the external components.
Playing an external component
from AUX
Portable audio
player, etc.
3.5 mm stereo mini plug
with “L” shaped connector
(not supplied)
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.
.
1
Connect to AUX terminal on the faceplate.
2
Select <AUX>.
3
Turn on the connected component and
start playing the source.
Bluetooth姞
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (AUX) on the faceplate of the unit.

KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
unit.

Operations may be different depending on the connected Bluetooth device. For details, refer also to
the instructions supplied with the device.
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1
Register (pair) a Bluetooth device with KS-BTA100.
-<SRC SELECT>
-<AUX>
-<BT ADAPTER>
2
Change the <SRC SELECT> settings of this unit.
(Hold)
3
Press MENU to exit.
KS-BTA100
Brown: Tel muting
Black: Ground
Blue/white: Remote
Wiring harness of the unit
(A page 19)
Brown
Black
Blue/white
External components
External components
ENGLISHޓ|
9
2012/12/14ޓ21:24:19KD-X200_150_100_U_EN

JVC KD-X100 Specifications

General

Brand	JVC
Model	KD-X100
Category	Car Receiver
Language	English