ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
Part list for
installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
Light blue/yellow
To the steering wheel
remote control adapter
IMPORTANT:
A custom wiring harness
(separately purchased) which is suitable for
your car is recommended for connection.
If your car does NOT have an
ISO terminal
( or )
ISO connector
*
2
Custom wiring harness (separately
purchased)
*
3
You can also connect a subwoofer speaker
directly without an external subwoofer
amplifier. For setting,
11
.
For some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the
supplied power cord
(D)
as illustrated.
If the unit does not turn on with modified
wiring 1, use modified wiring 2 instead.
Y: Yellow R: Red
Original wiring
Modified wiring 1
Modified wiring 2
Wiring connection
Signal cord (not supplied)
Remote wire (not supplied)
Fuse (10A)
To blue/white wire of the
wiring harness
(D)
JVC Amplifier
*
1
Rear/subwoofer output
Aerial terminal
*
1
Firmly connect the ground wire of the amplifier
to the car’s chassis to avoid damaging the unit.
Pin
Color and function
A2 Brown : Mobile phone system
A4 Yellow : Battery
A5 Blue/White : Power control
A6 Orange/white : Car light control switch
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple
ª
: Rear speaker (right)
B2 Purple/black
·
B3 Gray ª
: Front speaker (right)
B4 Gray/black
·
B5 White ª
: Front speaker (left)
B6 White/black
·
B7 Green ª
: Rear speaker (left)
*
3
B8 Green/black ·
JS_JVC_KD_X220_E_EE_EN_3.indd 17JS_JVC_KD_X220_E_EE_EN_3.indd 17 17/9/2014 8:58:38 AM17/9/2014 8:58:38 AM
To Next Page
Loading...
Need help?
General
