ENGLISH
15
Change the display information
Press repeatedly.
FM
or
AM
Station name (PS)*
1
Frequency Program type (PTY)*
1
*
2
Title*
1
*
2
Day/Clock (back to the beginning)
*
1
For FM Radio Broadcast Data System stations only.
*
2
If unavailable, “NO PTY” / “NO TEXT” appears.
USB
Playing time Day/Clock Album title/Artist*
3
Track title*
3
Folder/file name
(back to the beginning)
*
3
If not recorded, “NO NAME” appears.
USB-IPOD
USB-ANDROID
Playing time Day/Clock Album title/Artist*
4
Track title*
4
(back to the beginning)
*
4
If not recorded, “NO NAME” appears.
PANDORA
Station name Album title/Artist Track title Playing time
Day/Clock
(back to the beginning)
IHEART
Station name Track title*
5
Track Artist*
5
Day/Clock (back
to the beginning)
*
5
If unavailable, station name appears.
AUX
AUX Day/Clock
BT AUDIO
BT AUDIO Day/Clock
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [
SRCSELECT
] setting. (
4
)
Radio
• Radio reception is poor.
• Static noise while listening
to the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
USB / iPod
Playback order is not as
intended.
The playback order is determined by the file name
(USB).
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears and
file skips.
Check whether the file is a playable format. (
14
)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
“CANNOT PLAY” flashes and/
or connected device cannot
be detected.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 14)
• Reattach the device.
The iPod/iPhone does not
turn on or does not work.
• Check the connection between this unit and iPod/
iPhone.
• Detach and reset the iPod/iPhone using hard reset.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
TROUBLESHOOTING MORE INFORMATION
To Next Page
Loading...
Need help?
General
