JVC KD-X350BTS User Manual

ENGLISH
39
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
*
1
You can also connect a
subwoofer speaker directly
using this lead without
an external subwoofer
amplifier. For setting,
 25 .
Wiring connection
Car fuse block
Ignition switch
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle
factory wiring harness does not
have “12V ignition switch” wire.
Separate red wire
Fuse (10A)
Antenna terminal
Factory wiring
harness (vehicle)
Vehicle
dashboard
Black: Ground
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
Green: Rear speaker
*
1
/For 3-way crossover: Tweeter (left)
Green/black
*
1
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Join the same color wires together.
Red: Ignition 12V
Orange/white: Illumination
Blue/white: Remote (12V
350mA)
Light blue/yellow
To the steering wheel
remote control adapter
Custom wiring harness
(separately purchased)
Recommended connection
IMPORTANT
We recommend installing the unit with a commercially available custom wiring harness
specific for your car and leave this job to professionals for your safety. Consult your car audio
dealer.
(Not used)
Brown
Yellow: Battery 12V
JS_JVC_KD_X350BTS_K_EN_5.indd 39JS_JVC_KD_X350BTS_K_EN_5.indd 39 7/5/2017 9:56:05 AM7/5/2017 9:56:05 AM

JVC KD-X350BTS Specifications

General

Brand	JVC
Model	KD-X350BTS
Category	Receiver
Language	English