JVC KD-X382BT User Manual

6
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Getting Started
[F/W UPDATE]*2
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<https://www.jvc.net/cs/car/>.
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[TIME SYNC]
[ON]: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Data System signal. ; [OFF]: Cancels.
[CLOCK DISPLAY]
[ON]: The clock time is shown on the display even when the unit is turned
off. ; [OFF]: Cancels.
[ENGLISH]
Select the display language for menu and music information if applicable.
By default, [ENGLISH] is selected.
[РУССКИЙ]
[ESPANOL]
[FRANCAIS]
[DEUTSCH]*3
[DEMOMODE]
[ON]: Activates the display demonstration automatically if no operation is
done for about 15 seconds. ; [OFF]: Deactivates.
*1 Not displayed when the corresponding source is selected.
*2 Firmware downgrade is prohibited.
*3 Only for KD-X382BT.
Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM or AM.
2 Press S / T to search for a station automatically.
(or)
Press and hold S / T until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station is stored.
KD-X382BT_E_B5A-3841-00_EN_1st Draft.indd 6KD-X382BT_E_B5A-3841-00_EN_1st Draft.indd 6 17/9/2021 11:32:06 PM17/9/2021 11:32:06 PM

JVC KD-X382BT Specifications

General

Brand	JVC
Model	KD-X382BT
Category	Receiver
Language	English