3
ENGLISH
1
Turn on the power.
2
Play the source.
To operate the tuner, see pages 4 – 8.
To operate the tape deck, see page 9.
To operate the CD changer, see pages 15 – 17.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 10 – 12).
To drop the volume in a moment
Press
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second.
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 13.
Notes on One-Touch Operation:
• When you select tuner as a source in step 2 below, the power automatically
comes on. You do not have to press this button to turn on the power.
• If the cassette is already in the cassette compartment, tape play starts
automatically.
Volume level appears.
2
1
3
F M
CD-
CH
A M
/I/ATT
EN02-03.KS-FX12[J]/f 10/27/99, 10:17 AM3
To Next Page
Loading...
Need help?
General
