Setup
76
Ñ Software Information
You can confirm the software version of this
unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Display Setup
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
SETUP screen appears.
4
Touch [Display].
Display screen appears.
5
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display.
[ON]: Dims the display.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
■ [OSD Clock]
Select if you want to display the clock while
the screen is off, or while watching DVD
video and video files (USB, Disc media), etc.
“ON” (Default)/“OFF”
■ [Wallpaper Customize]
You can change the wallpaper image or
color. (P.76)
■ [Viewing Angle]
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
“0” (Default)/“-1”/“-2”/“-3”
■ [Screen transition effect]
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/ "OFF"
Ñ Change the wallpaper image
1
Touch [Wallpaper Customize] on the
Display screen.
2
Select an image from live or static
wallpapers.
*
1
*
2
*
1
Select a wallpaper color in advance.
*
2
Select an original image in advance.
To Next Page
Loading...
Need help?
General
