JVC KW-R935BTS User Manual

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
F/W UPDATE
UPDATE SYSTEM
F/W UP
xxxx
YES :Starts upgrading the firmware.; NO :Cancels
(upgrading is not activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
FACTORY
RESET
YES :Resets the settings to default (except the stored
station).;
NO :Cancels.
CLOCK
TIME SYNC
ON :The clock time is automatically set using the Clock
Time (CT) data in FM Radio Broadcast Data System
signal.;
OFF :Cancels.
CLOCK
DISPLAY
ON :The clock time is shown on the display even when
the unit is turned off.;
OFF :Cancels.
ENGLISH Select the display language for menu and music
information if applicable.
By default,
ENGLISH is selected.
ESPANOL
RADIO
“STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2 Press (or press on the remote control) to search for a station
automatically.
(or)
Press and hold (or press and hold on the remote control) until “M”
flashes, then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
GETTING STARTED
JS_JVC_KW_R935BTS_K_EN_7.indd 5JS_JVC_KW_R935BTS_K_EN_7.indd 5 7/4/2017 2:45:21 PM7/4/2017 2:45:21 PM

JVC KW-R935BTS Specifications

General

Brand	JVC
Model	KW-R935BTS
Category	Car Receiver
Language	English