32
5
Customising TV Settings
GB
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s
setting.
Picture Mode Select among picture mode: Standard / Mild / User / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast Adjusts the difference between light and dark levels
in the picture (for User mode).
Picture Mode Standard
Contrast 50
Brightness 50
Colour 50
Sharpness 50
Tint 50
BACK MENUEXIT
Brightness Increases or decreases the amount of white in the
picture (for User mode).
Colour Controls the colour intensity (for User mode).
Sharpness Adjusts the level of crispness in the edges between
light and dark areas of the picture (for User mode).
Tint (For NTSC
format)
Adjusts the balance between red and green levels
(Tint is only available for NTSC signal reception).
Colour
Temperature
Select among colour temperature: Medium / Cool / User / Warm.
Adjusts the colour components independently to achieve a warm or cool
colour (for User mode).
• Red: Increases red tint
• Green: Increases green tint
• Blue: Increases blue tint
Colour Temperature Medium
Red 50
Green 50
Blue 50
BACK MENUEXIT
2. Press the buttons to select the following picture options and then
press the OK button.
Picture Mode
Colour Temperature
Aspect Ratio
Noise Reduction Middle
Screen
Standard
Medium
Auto
Backlight 7
PICTURE
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Picture Setting
Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
buttons to select the
PICTURE menu and then press the OK button.
To Next Page
Loading...
Need help?
General
