7
Initial settings
When the TV is first turned on, it enters the initial setting
mode. Follow the instructions on the on-screen display to
make the initial settings.
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the
button on the remote control
After a short interval the power lamp changes from red to
green.
3 AUTO PROGRAM menu appears
INSTALL
AUTO PROGRAM
:SELECT OK:MOVE
4 Press the OK button to enter the
AUTO PROGRAM.
AUTO PROGRAM
START
OK: START
5 Press the OK button to start AUTO PROGRAM.
AUTO PROGRAM
NOW PROGRAMMING
MENU:EXIT
The AUTO PROGRAM menu appears and received TV
channels are automatically stored.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
After the TV channels have been registered in the
program numbers, the PR LIST menu appears
PR LIST
01 -----
02 -----
03 -----
04 -----
05 -----
06 -----
07 -----
08 -----
09 -----
10 -----
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
21 -----
22 -----
23 -----
24 -----
25 -----
26 -----
27 -----
28 -----
29 -----
30 -----
图
NAME
INSERT
• If you want, you can now edit the program numbers
using the AUTO PROGRAM function.
For details, see “To edit the PR LIST menu” on page 20.
VCR/TV/
DVD Switch
TV/DTV
MENU
/I
button
DELETE
To Next Page
Loading...
Need help?
General
