EN
7
If the batteries in your remote control are run down, you can use the buttons on your TV set. In TV mode,
they have the same functions as the corresponding buttons on the remote control. The OK button on the TV
set can be pressed repeatedly to select the required source. In the menus they have the following functions:
PR+ ▲
PR- ▼
VOL+ ►
VOL- ◄
Menu
OK OK
Getting started
Switching the TV on and off
1. When the power cord is connected, the TV will be turned on directly or be in standby mode. If the TV is in
standby mode, press the or PR+/PR- button on the set or the button on the remote control to turn it on.
2. To put the TV into standby mode, press the button on the set or the button on the remote control. The
TV set remains powered up, but with low energy consumption.
3. To switch off the TV, unplug the mains socket from the mains outlet.
(*On certain models, you have to turn on the power switch rst.)
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
