JVC LT-40C890 User Manual

32
5
Using the Features
3. Adding the timer
Press the
to select each setting below.
Channel Type Press the buttons to select the channel type that
you want to set a timer for.
ALL - Will allow you to select any channel
DIGITAL AERIAL - Will only let you select channels
from your aerial.
Timer Type Press the
buttons to select RECORD or TIMER.
RECORD - Will record a programme
TIMER - Will automatically switch to the selected
programme when it starts.
Channel Press the
buttons to select the channel.
Record Type Not adjustable.
Date Press the
buttons and the NUMBER buttons to
set the date.
Start Press the
buttons and the NUMBER buttons to
set the start time.
End Press the
buttons and the NUMBER buttons to
set the end time.
Duration Set automatically.
Repeat Press the buttons to set the recording to record
ONCE - DAILY - WEEKLY or just WEEKDAYS.
Change/Delete Press the
buttons to select ALLOWED or
DISALLOWED
ALLOWED - You allow anyone to change or delete the
recording.
DISALLOWED - You will have to enter the PIN code to
change or delete the recording.
Playback Press the
buttons to select USE PARENTAL
SETTINGS, DISALLOWED or ALLOWED. You will
need to enter the PIN number if you want to play a
recording when you select 'use parental settings and
disallowed'.
The TIMERS menu will now be displayed, if you have already set some other
recordings you'll see them here.
2. ADD TIMER will be selected, press OK. The ADD TIMER menu will be
displayed.
Setting a Timer or Timed Recording
This function is used to perform scheduled recordings or timers (will switch the programme on when it starts).
The recording from timers or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the
HOME button then press the buttons to select TV.
Press
to highlight TIMERS and press OK.
• When the preset time is reached, the
TV will start recording automatically.
• If a programme recording starts
when the TV is in standby mode, the
LED indicator will flash.
JVC 40' LED Smart 4K HDR TV LT-40C890 Manual.indd 32 07/12/2018 08:30

JVC LT-40C890 Specifications

General

Brand	JVC
Model	LT-40C890
Category	LED TV
Language	English