19
Connecting Other Equipment
By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio
output jacks, such as a portable audio player, etc.
• Refer to the instruction manual supplied with the equipment.
NOTE:
Make sure the unit is on standby when connecting or disconnecting other equipment.
Operations
To Listen to Other Equipment
To Adjust the Sound Input Level from the Equipment
You can adjust the sound input level from the connected equipment if the incoming signal is too
weak or too strong.
1
Select AUDIO IN as the source.
2
Start playing the equipment.
1
Select AUDIO IN as the source.
2
Hold down to adjust the sound input level.
LEVEL 1: Ordinary input level.
LEVEL 2: Increases the input level.
LEVEL 3: Increases the input level more than “LEVEL 2.”
Portable
audio player
Rear side
Stereo mini plug cord
(not supplied)
To headphones or
audio out
FM
AUDIO IN
LEVEL 1
LEVEL 3
LEVEL 2
Playing Back from Other Equipment
NX-PN10[J].BOOK Page 19 Thursday, April 9, 2009 8:55 AM
To Next Page
Loading...
Need help?
General
