19
Synchronized recording with CD playback
You can make the CD player to start playback when the tape deck enters the recording mode.
STANDBY
CD POTABLE SYSTEM RC-BM5
1
5 2134
1
Load a cassette.
Use only a type-I normal tape.
2
Load a CD.
3
Press the CD/RANDOM button to enter CD mode.
4
Specify a track or point on the disc to start
recording.
• To start recording from the desired track, select the
track by pressing the 4 or ¢ button in stop
mode.
• To start recording from the desired point on a disc,
play the disc and pause at the desired point by
pressing the 3/8 button.
Erasing
5
Press the ¶ REC and 2 PLAY buttons
simultaneously.
Synchronized recording starts.
When the tape reaches the end first, the CD player
continues playback.
When the CD player stops first, the tape continues
running. In this case, press the § STOP/EJECT button
to stop the tape.
When recording on a pre-recorded tape, the previous
recording is erased and only the new recording is heard
next time the tape is played back.
To erase a tape without making a new
recording
1
Press the 7 (CD stop) button with no disc loaded in
the unit.
2
Press the ¶ REC and 2 PLAY buttons
simultaneously.
02_01-22_RCBM5_J_En.p65 5/21/02, 2:56 PM19
To Next Page
Loading...
Need help?
General
