JVC RC-QN1 User Manual

RC-QN1/QN2/QN3
TUNER BAND
You can. listen to FM:.and AM. stations. Stations can be tuned in
manually, automatically, or fron preset memat ‘y storage.
One Touch Radio (AC power only) —
Just press the TUNER BAND button to turn on the Unit and start
eye the station: you were last tuned to.
You can also switch from any other sound source to the radio by
pressing the TUNER BAND button.
ress the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band changes as follows:
FM Auto —>* FM MONO -*% AM —>
: elect a station using one of the following
| Manual a Tordag
Press the tt or ®t button repeatedly to move from frequency
to frequency until you find the station you want.
(~) oF
\
, S&S
rd d
OR
MM Auto Tuning
If you press and hold the ¢<¢ or m1 button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
OR
Mi Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET button to select the preset station.
After you have selected the preset number, the band and the fre-
quency are displayed.
Example:Press the PRESET button until the preset number 12
“P- 12” appears.
P- td
OR
Mi Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the station by entering its preset number on the number
keys.
cM mac
aan i on 2 i oe
1-10
PRESET
———A-%-S
-——~ TUNER BAND
Band display, Frequency display, Preset channel
- MM
(Display when using the Tuner)
¢ Exampile:For:channel.5, press.5. For channel.15, press.+10
then 5S,
°
The
band
and
the
frequency
are
displayed.
.
¢ For FM broadcast, extend ani turn the. elescopie antenna.
¢ For AM broadcast, turn the Unit itself.
You can preset up to 15 FM stations and up to 15 AM stations into
memory using the Remote Control.
Auto Presetting (Using the Unit)
In each band, you can automatically preset FM-15, AM-15 stations.
Preset numibers will be allocated as stations are found, starting from
the station currently tuned to and moving up the frequency.
Repeat steps 1-2 for the other ba
WB if you want to change any of the auto preset stations, follow the
procedure for Manual Presetting.
CAUTION: If the Unit is uz
Manual
|
Presetting
(Using
ti
the
Re-
a = ra- Number key(s) (hold for 2 seconds),
Select a band by pressing the TUNER
BAND button.

JVC RC-QN1 Specifications

General

Brand	JVC
Model	RC-QN1
Category	CD Player
Language	English