JVC RC-QN1 User Manual

¢ To preset.numbers | to 10: Press.the number key and hold
down-for 2:seconds:.
¢ To preset numbers |1 to 15: Press and release the +10 but-
ton, then press the second number key (1 to 5) and hold
down for 2 seconds.
When the preset display blinks, the setting is stored and you can
release the number key. The display returns to the normal band
and frequency display.
Example: Preset number = 12
mM. i TCM Uae
cr i Pat tact
RC-QN1/QN2/QN3
The “STEREO” indicator lights up and you can hear stereo effects,
when a program is broadcast in stereo.
However if an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you lose any
stereo effect.
Press the TUNER BAND button to select FM.
MONO mode.
The “MONO” indicator lights up on the display.
To restore the stereo effect, press the TUNER BAND button
to select FM Auto mode. The “MONO” indicator goes out.
You can use Normal or Repeat Play. Repeat Play can be set to repeat
all or just one of the tracks on the CD.
One Touch CD Piayer
(AC power only)
ME dust press the CD »/# button.
¢ The power is automatically turned on. If a CD is already
inserted, “PLAY” is displayed and the CD will start play-
ing from the first track.
* Ifno CD is inserted, “NO DISC” is displayed on the dis-
play and the CD Player remains in Stop mode.
Press the CD OPEN buiton on the Unit.
The CD holder opens.
Place a CD, with its label side up.
Genily close the CD holder by hand.
Press the CD p/11 button.
The first track of the CD begins playing.
The CD Player automatically stops when the last track of the CD has
finished playing.
* During playback, the track number being played and the play-
back time elapsed are shown on the display.
To stop playing the CD, press the @ button.
Playing time, Preset number
(Display when using the CD Player)
The following information for the CD is displayed.
Total number of tracks---—-—
To pause, press the CD> >.
To cancel pause, press the-CD p/m again. Play continues from.
the point where it was paused.
Notes:
¢ You can place an 8 cm (3") CD without an adaptor.
e Ifthe CD cannot be read correctly (because it is scratched, for
example), “000000” appears on the display.
¢ Even if other function is selected during playing the CD, the
last track is memorized.
During playback, press the +<<.or » 1 button to select the
track you want.
The selected track starts playing.
¢ Press and release the m1 bution to go forward one track at a
time.
* Press and release the ¢<¢ button to go back one track at a time.
During playback, hold down the -<<-or >»: button.
This operation will fast forward/backwards the CD so you can
quickly find a particular passage in the track you are listening to (the
CD is played slowly for a moment and then the playback speed in-
creases).

JVC RC-QN1 Specifications

General

Brand	JVC
Model	RC-QN1
Category	CD Player
Language	English