1
0
G E T T I N G S T A R T E D
Changing and Inserting Batteries.
Use only size AA batteries.
Push down on the triangle on the remote's back cover,
and slide the cover off to remove it.
Insert the two supplied AA batteries, carefully noting the
“+” and “–” markings on the batteries and remote control.
To avoid a short circuit, insert “–” end first.
Snap the cover back into place.
REMOTE CONTROL
1
2
3
RM-C755
RM-C755
NOTES:
❒ Once the batteries are in the remote and you have confirmed that
the remote is working, you must program the remote to operate
your particular brand of VCR and/or cable box.
❒ If it takes you more than 3 minutes to change the batteries, you
might have to reprogram the CATV and/or VCR codes.
❒ If the remote control acts erratically, replace the batteries. Battery
life is usually one year.
❒ We recommend the use of alkaline batteries for longer battery life.
To Next Page
Loading...
Need help?
General
