(No.MB723<Rev.003>)1-7
(3) Disconnect the card wire from Main board connected to
connector CN450
of the iPod board. (See Fig.11)
(4) Disconnect the connector wire from Right key board con-
nected to connector CN303 of the Main board. (See Fig.11)
(5) Disconnect the connector wire from USB board connected
to connector CN201
of the Main board. (See Fig.11)
(6) Disconnect the connector wire from Left key board con-
nected to connector CN301
of the Main board. (See Fig.11)
Fig.11
(7) Disconnect the connector wire from LCD board connected
to connector CN304
of the Main board. (See Fig.12)
Fig.12
3.1.6 Removing the Main board (See Fig.13, 14, 15, 16)
(1) Disconnect the card wire from pickup connected to connec-
tor CN701
of the Main board. (See Fig.13)
Fig.13
(2) Disconnect the connector wire from Main board connected
to connector of the Mechanism board. (See Fig.14)
Fig.14
(3) Disconnect the connector wire from Door switch board con-
nected to connector CN305
of the Main board. (See Fig.15)
Fig.15
(4) Remove the four screws H attaching the Main board. (See
Fig.16)
Fig.16
CN450CN301
CN303
CN201
CN304
CN701
connector
CN305
HH
To Next Page
Loading...
Need help?
General
