36
Surround Modes Applicable to the Various Software
Available Surround modes vary depending on the speaker settings and the incoming signals.
The table below shows the relation of the Surround modes and the incoming signals (with the surround back speakers and EX/ES setting).
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround
channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo) surround
signals.
Incoming Signal Type Surround Back Channel Setting EX/ES Setting Available Surround Mode
Dolby Digital EX 2SPK/1SPK AUTO/ON DOLBY D EX
OFF DOLBY D
NONE AUTO/ON DOLBY D (VIRTUAL SB)*
1
OFF DOLBY D
Dolby Digital (3/2, 2/2) 2SPK/1SPK AUTO DOLBY D
ON DOLBY D EX
OFF DOLBY D
NONE Not available DOLBY D
Dolby Digital (3/1, 2/1) 2SPK/1SPK AUTO/ON/OFF DOLBY D
NONE Not available DOLBY D
Dolby Digital (1/0, 3/0) 2SPK/1SPK/NONE Not available DOLBY D
Dolby Digital (Dual Mono) 2SPK/1SPK/NONE Not available DUAL MONO
DTS-ES Discrete 6.1ch 2SPK/1SPK AUTO/ON ES DSCRETE
OFF DTS
NONE AUTO/ON DTS (VIRTUAL SB)*
1
DTS-ES Matrix 6.1ch 2SPK/1SPK AUTO/ON ES MATRIX*
2
DTS-ES 96/24 Matrix OFF DTS
NONE AUTO/ON DTS (VIRTUAL SB)*
1
*
2
OFF DTS
DTS, DTS 96/24 (3/2, 2/2) 2SPK/1SPK AUTO DTS
ON DTS NEO:6*
2
OFF DTS
NONE Not available DTS
DTS (3/1, 2/1) 2SPK/1SPK AUTO/ON/OFF DTS
NONE Not available DTS
DTS (1/0, 3/0) 2SPK/1SPK/NONE Not available DTS
DTS (Dual Mono) 2SPK/1SPK/NONE Not available DUAL MONO
Incoming Signal Type Available Surround Mode
Analog/PCM/Dolby Digital (2/0)/DTS (2/0) PL II MOVIE / PL II MUSIC / PRO LOGIC / NEO:6 CINMA / NEO:6 MUSIC
DVD MULTI None
3D HEADPHONE Mode—3D H PHONE
You can also enjoy the Surround modes through the headphones.
If you press SURROUND when the front speakers 1 and 2 are both deactivated, 3D HEADPHONE mode (3D H PHONE) is activated
without respect to the type of software played back. “3D H PHONE” appears on the display and the DSP and HEADPHONE indicators
also light up.
*
1
Virtual 6.1-channel surround
If you have connected (and activated) the surround speakers, you can use Virtual 6.1-channel surround when playing back Dolby Digital
EX or DTS-ES software without connecting the surround back speakers. This surround reallocates the surround back channel to the
surround speakers so that you can still feel the great surround effect from behind. The VIRTUAL SB (Surround Back) indicator lights up
on the display.
*
2
DTS 96/24 processing is not
applied. If you want to apply
the processing, set the EX/
ES setting to “OFF.”
34-40_8030&7030[J]10.pm6 03.2.13, 2:45 PM36
To Next Page
Loading...
Need help?
General
